How much weight can a wall-mounted locker hold? Most professional-grade steel lockers can hold 20–50 lbs per section when properly anchored into studs or masonry. Always verify the specific load rating for your wall type (needs verification). Is it better to bolt lockers to the floor?. All materials stored in tiers shall be stacked, racked, blocked, interlocked, or otherwise secured to prevent sliding, falling or collapse. Employers shall conspicuously post maximum. . Here you'll find specifications on dimensions, materials, weight capacities, and more, ensuring you have all the details you need to make an informed decision. If you have any questions or need further assistance, please send us an email or give us a call. Typically, steel lockers are built to withstand substantial weight. For more robust support, concrete and brick walls can handle up to 100 pounds. Using a stud finder is essential to locate studs, which are usually spaced 16 inches apart. . The weight is distributed directly to the floor, significantly reducing the risk of the unit pulling away from the mounting surface over time. Common Installation Mistakes to Avoid: Failure to Anchor: Even "standing" units should be bolted to the floor to prevent tipping if a user pulls on an open. . Penco's Vanguard™ locker line is the embodiment of what it takes to withstand the daily use and abuse typically dealt to a locker.